How to install cone-type rubber fender?

Installing cone-shaped rubber fenders is a professional operation that needs to be carried out in the right way and with the right steps.

Here are the detailed steps to install the conical rubber fender:

Material preparation:

1. Cone-type rubber fender

2. Large screwdriver

3. Rubber pad

4. Bolts and nuts

5. Iron mallet

 

Step 1: Prepare

1. Ensure that the working area is clean and tidy, and avoid obstacles and dangerous goods.

2. Prepare the cone-shaped rubber fender and other materials required for installation.

3. Cut the cone-type rubber fender according to the required size and length.

 

Step 2: Install rubber pads

1. Place the rubber pad on the position where the cone type rubber fender needs to be installed, ensuring that it is smooth and can cover the installation position.

2. Secure the rubber pad to the installation position using a screwdriver to ensure that it does not move or deform.

 

Step 3: Install cone-shaped rubber fender

1. Place the cut cone rubber fender on the rubber pad to ensure that it is aligned with the rubber pad.

2. Fix the cone-type rubber fender on the installation position with bolts and nuts, and pay attention to the tightening degree of bolts should not be too tight or too loose.

3. Gently tap the surface of the cone-type rubber fender with an iron mallet to ensure that there is no gap in the installation position and that it can play a good protective role.

 

Step 4: Check and adjust

1. After installation, check the position and fixing of the cone-type rubber fender to ensure that it is installed correctly and firmly.

2. According to needs, the position and fixing method of cone-type rubber fender can be adjusted appropriately to ensure that it can play a protective effect.

Installation of cone rubber fender requires professional installation tools and technology, if you do not have relevant experience or skills, it is recommended to ask professional installation personnel to ensure the correct and safe installation. I hope the above steps will help you, and wish you a successful completion of the cone rubber fender installation。